No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AMI Smart Meter Reading Solution V200R010C10 Planning and Design Guide

This document describes the overall and detailed design of functions and services in the AMI Smart Meter Reading Solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RS485 Meter Parameter Plan

RS485 Meter Parameter Plan

An RS485 meter connects to a DCC through RS485, exchanges data with the DCC through DLT645, and connects to a DCU through the DCC. Table 6-15 describes the RS485 meter parameter plan.
Table 6-15  RS485 meter parameter plan

Item

Parameter

Description

Profile parameters

Device model

The value is composed of the communication protocol plus the device model, for example, RS485-DLT645-CL710K11.

ESN

The ESN is the 20-digit code of an RS485 meter and consists of letters and digits.

SN

The value is the 11-digit or 12-digit code of an RS485 meter before delivery.

Asset name

Name of an RS485 meter. The value is user-defined based on the actual name and cannot contain special characters.

Factory code

Name of the manufacturer. For example, the EEM supports the CLOU's RS485 meter profile, so the value of this parameter is CLOU.

Organization name

Name of an organization that an RS485 meter belongs to. If the organization name is not specified duringRS485 meter profile creation, the RS485 meter belongs to the organization default by default. After the profile is created, the organization can be changed.

DCC

DCC connected to an RS485 meter.

Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100069579

Views: 5446

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next