No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AMI Smart Meter Reading Solution V200R010C10 Planning and Design Guide

This document describes the overall and detailed design of functions and services in the AMI Smart Meter Reading Solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Networking Design

Networking Design

The application layer of the AMR solution involves the EEM and DCP. The EEM and DCP are deployed on servers. The AMR solution supports remote disaster recovery. The remote disaster recovery solution can be deployed in the single-node system or cluster mode. The networking varies depending on the deployment solution.

Single-Node System Deployment Solution

All application systems share the database. All application systems including the database use the single-node system. Each application system and the database can be deployed on the same device or separately. The server configuration is different when different deployment solutions are used. See the application system design. For the single-node system deployment solution, load balancing does not need to be configured. Figure 1-1 shows the networking.
Figure 1-1  Networking

Cluster Deployment Solution

The EEM and DCP are deployed in cluster mode, and the database also uses the cluster or active/standby mode. Load balancing needs to be configured to implement services at the application layer. The AMR solution supports the LVS and F5 load balancer. Both the software load balancer and F5 load balancer use the active/standby mode to ensure reliability. The networking is different for different load balancing solutions.
  • Figure 1-2 shows the networking when the LVS is used.
    Figure 1-2  Networking when the software load balancer is used
  • Figure 1-3 shows the networking when the F5 load balancer is used.
    Figure 1-3  Networking when the F5 load balancer is used

Remote Disaster Recovery Solution

The remote disaster recovery solution can be deployed in the single-node system or cluster mode. When the cluster mode is used, each application system supports only the F5 load balancer. For the networking design, see Networking of the Remote Disaster Recovery Solution.

Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100069579

Views: 6176

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next