No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AMI Smart Meter Reading Solution V200R010C10 Planning and Design Guide

This document describes the overall and detailed design of functions and services in the AMI Smart Meter Reading Solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Networking Design

Networking Design

Networking Design for Server Deployment

The small-sized AMI solution is used when there are at most 20,000 smart meters. When the small-sized AMI solution uses server deployment, the solution supports remote disaster recovery in the single-node system or cluster mode. The application system selection, deployment precautions, and networking architecture are the same as those of the standard AMI solution. For details, see Networking Design for Server Deployment. In cluster mode, it is recommended that the small-sized AMI solution should use software load balancing. If remote disaster recovery is deployed, the F5 load balancer must be used.

Networking Design for VM Deployment

The VM deployment mode, deployment requirements, and network architecture of the small-sized AMI solution are the same as those of the standard AMI solution. For details, see Networking Design for VM Deployment.

Updated: 2019-03-07

Document ID: EDOC1100069579

Views: 6750

Downloads: 11

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next