No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AMI Smart Meter Reading Solution V200R010C10 Planning and Design Guide

This document describes the overall and detailed design of functions and services in the AMI Smart Meter Reading Solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Transmission Layer Design

Data Transmission Layer Design

The data transmission layer design refers to the design between application layer systems and terminals of the data perception layer. The DCP at the application layer communicates with DCUs and GPRS meters at the data perception layer through a carrier network. A DCU can connect to the DCP through GPRS/3G, microwave, or Ethernet, and GPRS meters can communicate with the DCP through GPRS. If DCUs are deployed in sparse areas where cabling is inconvenient, the DCUs can communicate with the DCP through the GPRS/3G network. If there are many terminals, DCUs are distributed, and cabling costs are high, DCUs can connect to the application layer system through microwave to save costs. If DCUs are deployed in an area where cabling is convenient, the DCUs can communicate with the DCP in wired mode over a carrier network to ensure communication reliability.

The DCP communicates with devices at the data perception layer through DLMS, and DLMS is used between a DCU and DCP, between a DCU and PLC meters, and between GPRS meters and the DCP. A DCU communicates with the DCP through TCP/IP-based DLMS and communicates with PLC meters through HDLC-based DLMS. The DCP communicates with GPRS meters through TCP/IP-based DLMS.

Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100069579

Views: 5833

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next