No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

AMI Smart Meter Reading Solution V200R010C10 Planning and Design Guide

This document describes the overall and detailed design of functions and services in the AMI Smart Meter Reading Solution.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DCC Parameter Plan

DCC Parameter Plan

DCC parameters include profile parameters of a DCC in application systems and communication parameters. A DCC communicates with a DCU through DLMS, and communicates with a smart meter through DLT645 or DLMS. Table 6-11 describes the DCC configuration.
Table 6-11  DCC parameter plan

Item

Parameter

Description

Profile parameters

Device model

The value is composed of the communication protocol plus the device model. The value is DLMS-AR501C.

ESN

The ESN is the attached code of a DCC. The value allows only letters and digits.

Asset name

Name of a DCC. The value is user-defined based on the actual name and cannot contain special characters.

Factory code

Vendor of a DCC. DCCs are Huawei products, so the value is Huawei.

Organization name

Name of an organization that a DCC belongs to. If the organization name is not specified during DCC profile creation, the DCC belongs to the organization default by default. After the profile is created, the organization can be changed.

DCU

DCU to which a DCC is mounted. During DCC installation, you must select the DCU to which a DCC is mounted.

Communications parameters

Password

Low-level encryption key

The low-level and high-level authentication passwords used for communication between a DCC and a DCU contain 6 to 16 characters that allow only letters and digits. The passwords can be configured based on site survey data. If the passwords are not configured, the default password Admin@huawei is used.

High-level encryption key

Authentication level

Authentication level used for communication between a DCC and a DCU. There are three authentication modes: high-level authentication, low-level authentication, and non-authentication.

Encryption algorithm

Encryption algorithm used for communication between a DCC and a DCU. The value can be aes-128 or sha-256. You can specify an encryption algorithm based on the network situation.

Translation
Download
Updated: 2019-03-07

Document ID: EDOC1100069579

Views: 6022

Downloads: 9

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next