No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCube HCI 3.2 vCenter Plug-in User Guide 01 (VMware vSphere)

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to vCenter (VMware vSphere 6.5/6.7)

Logging In to vCenter (VMware vSphere 6.5/6.7)

Scenarios

Log in to vCenter using a browser.

Procedure

  1. Open the browser on the local PC.

  2. Enter https://vCenter IP address in the address box, and press Enter.

    The vCenter login page is displayed.

  3. Select the login mode.
    • If the vCenter version is 6.5, choose vSphere Web Client (Flash).
    • If the vCenter version is 6.7, choose Launch vSphere Web Client (FLEX).
    NOTE:

    Install the Flash plug-in if it is not installed.

  4. Enter the user name and password.

    • The default user name is administrator@vsphere.local.

    • The password is the password set by the user during vCenter deployment.

  5. Click Log In.

Translation
Download
Updated: 2019-03-21

Document ID: EDOC1100071999

Views: 2364

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next