No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionCube HCI 3.2 vCenter Plug-in User Guide 01 (VMware vSphere)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitor

Monitor

Hardware

WebUI Description
Function

The Hardware page displays hardware information.

Parameter
Table 4-4 Basic Info parameters

Parameter

Description

Name

Server name.

Server SN

Server serial number.

Chassis SN

Serial number of the chassis holding the server.

Model

Server model.

Status

Server status, which can be any of the following:

  • Online
  • Offline

Management IP Address

Management IP address of the server.

BMC IP Address

BMC IP address of the server.

Table 4-5 Hardware Info parameters

Parameter

Description

Mainboard

Server mainboard information, including:

  • Mainboard SN: serial number of the mainboard.
  • BIOS Version: BIOS version.
  • Mainboard Vendor: manufacturer of the mainboard.

Power supplies

Server power supply unit (PSU) information, including:

  • ID: PSU ID.
  • Power(W): PSU power.
  • Status: PSU status.
    • Normal
    • Abnormal
    • Unknown
    • Not detected

Fans

Server fan information, including:

  • ID: fan ID.
  • Fan Speed(Rev/Min): fan speed.
  • Status: fan status, which can be any of the following:
    • Normal
    • Abnormal
    • Unknown
    • Not detected

CPU

Server CPU information, including:

  • Id: CPU No.
  • Model: CPU model.

Memory

Server memory information, including:

  • Location: memory location.
  • Vendor: memory manufacturer.
  • Capacity(GB): memory capacity in GB.
  • Frequency(MHZ): memory frequency in MHz.

Physical disks

Server disk information, including:

  • Slot: disk slot No.
  • In place: whether the disk is installed in the slot.
    • Present
    • Absent
  • Frequency: disk frequency status.
    • Normal
    • Minor
    • Major
    • Critical
    • Absent
Viewing Hardware Information
Procedure
  1. Choose Home > Inventories > FusionCube.

    The FusionCube page is displayed.

  2. In the navigation tree on the left, select the connected FusionCube.

    The connected FusionCube page is displayed.

  3. Click Monitor.

    The Monitor page is displayed.

  4. Click Hardware.

    The Hardware page is displayed.

    The Server List area lists all the servers managed by FusionCube.

  5. Select the server to be queried.
    The basic information and hardware information of the server are displayed.
    Figure 4-2 Hardware information

Storage Pool

WebUI Description
Function

The Storage Pool page displays information about storage pools.

Parameter
Table 4-6 Storage Pools parameters

Parameter

Description

Name

Storage pool name.

ID

Storage pool ID.

Total

Total capacity of the storage pool.

Percentage of Remaining Space

Remaining space (%) of the storage pool.

Status

Storage pool health status.

  • Normal
  • Abnormal
Table 4-7 Storage Information parameters

Parameter

Description

Storage Pool Name

Name of the storage pool.

Storage Pool Redundancy Policy

Storage pool redundancy policy.

  • Redundancy
  • EC

Redundancy

Number of data copies kept in the storage pool.

Main Storage Type

Main storage type, which can be:

  • SSD card
  • SSD disk
  • SAS disk
  • SATA disk
  • NVMe SSD

Cache Type

Cache type, which can be:

  • SSD card
  • SSD disk
  • NVMe SSD

Security Level

Security level of the storage pool.

  • Rack Level
  • Server Level

Cache/Main Storage Ratio

Ratio of the cache to the main storage of the storage pool.

Viewing Storage Pool Information
Procedure
  1. Choose Home > Inventories > FusionCube.

    The FusionCube page is displayed.

  2. In the navigation tree on the left, select the connected FusionCube.

    The connected FusionCube page is displayed.

  3. Click Monitor.

    The Monitor page is displayed.

  4. Click Storage Pool.

    The Storage Pool page is displayed.

  5. View storage pool information.
    Figure 4-3 Storage pool information

Alarm

WebUI Description
Function

The Alarm page displays alarm information.

Parameter
Table 4-8 Alarm parameters

Parameter

Description

Severity

Alarm severity level.

  • Critical
  • Major
  • Minor

  • Warning

Alarm Name

Alarm name.

Alarm Object

Object for which the alarm is generated.

Object Type

Type of the alarm object.

Component

Component for which the alarm is generated.

Generated At

Time when the alarm was generated.

Viewing Alarm Information
Procedure
  1. Choose Home > Inventories > FusionCube.

    The FusionCube page is displayed.

  2. In the navigation tree on the left, select the connected FusionCube.

    The connected FusionCube page is displayed.

  3. Click Monitor.

    The Monitor page is displayed.

  4. Click Alarm.

    The Alarm page is displayed.

  5. View alarm information.
    NOTE:

    You can click to refresh the alarm information.

    Figure 4-4 Alarm information
Translation
Download
Updated: 2019-03-21

Document ID: EDOC1100071999

Views: 1906

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next