No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an External Gateway

Creating an External Gateway

  1. Choose Tenant > Public Service > External Gateway and click Create.

  2. Enter basic information and click Next.

  3. Enter gateway information and click Next.

  4. Select the default tenant sharing attribute and click Next.

  5. After confirming that the configuration is correct, click Finish.


After the Agile Controller-DCN is interconnected with the OpenStack, the tenant network interface connected to the control node is changed to a Layer 3 interface, and the tenant network interface connected to the compute node is changed to VLAN 53 of the access type.

Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 3282

Downloads: 22

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next