No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Fabric Network

Creating a Fabric Network

  1. Choose Network > Network Management > Fabric and click Create.

  2. Set the parameters and click Confirm.

  3. Click Add, select the switch devices to be added to the Fabric network, and click Confirm.

  4. Select the gateway switch, click Configure Egress Gateway, and enter the VTEP MAC address of the device. Then, click Confirm.

  5. Click Next. Check the correctness of the configuration information. If the information contains any error, click Previous. If the information is correct, click Finish.
Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2455

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next