No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Internal and External Links

Configuring Internal and External Links

You need to set the internal and external links between the gateway and firewall for service traffic that passes through the firewall.

  1. Choose Network > TOPO > Physical Network from the main menu.

  2. Click the link between the firewall and gateway switch.

  3. In the dialog box that is displayed, right-click the link between the firewall and gateway switch and choose Set the link role from the shortcut menu.

  4. Click Set the link to the internal and external link and click OK.

  5. Verify that the link becomes bidirectional.

Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2341

Downloads: 15

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next