No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Architecture for Interconnection Between the Agile Controller-DCN and Red Hat OpenStack

Architecture for Interconnection Between the Agile Controller-DCN and Red Hat OpenStack

The Agile Controller-DCN is connected to Red Hat OpenStack based on the standard Neutron model and interfaces of the OpenStack community. The services include the Layer 2 or Layer 3 service, FWaaS service, QoS service, and VPNaaS service, as shown in Figure 1-9.

Figure 1-9 Connection architecture between the Agile Controller-DCN and Red Hat OpenStack
  • AC ML2 Driver

    The AC ML2 Driver implements standard interfaces defined by Neutron ML2, detects Neutron port events, and invokes the Agile Controller-DCN northbound REST API to implement network configuration on TORs of PMs and VMs.

  • AC VPN Driver

    The AC VPN Driver detects the VPN services provisioned by users through the cloud platform and invokes the Agile Controller-DCN northbound API to deliver the interconnection configurations between the service leaf nodes and the firewall. The Agile Controller-DCN invokes the SecoManager northbound API to deliver the VPN configurations to the Huawei firewall (Huawei firewall only).

  • AC L3 plugin

    The AC L3 plugin detects Neutron vRouter, network, EIP, and SNAT events and invokes the Agile Controller-DCN northbound API to dynamically deliver corresponding configurations.

  • AC FWaaS plugin

    The AC FWaaS plugin detects the firewall services delivered by the cloud platform and invokes the Agile Controller-DCN northbound API to deliver the interconnection configurations between the service leaf nodes and the firewall. The Agile Controller-DCN invokes the SecoManager to deliver the configurations to the Huawei firewall (Huawei firewall only).

  • AC QoS Plugin

    The AC QoS plugin detects QoS services (port rate restriction and DSCP Remark) delivered by the cloud platform and invokes the Agile Controller-DCN northbound API to deliver QoS configurations.

  • CE1800V

    The CE1800V replaces the open-source OVS, functions as the VXLAN VTEP to provide VM access, and supports distributed firewalls.

Download
Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 3430

Downloads: 28

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next