No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Undercloud

Installing the Undercloud

  1. Install the Undercloud.

    If no error is reported, it takes about 11 minutes to install the Undercloud.

    If any error occurs during the installation process, rectify the error first. Then you need to delete the /var/run/os-refresh-config.lock file before continuing the installation.

  2. After the Undercloud is installed, a stackrc file containing the Undercloud environment variables is generated in the /home/stack/ directory of the Undercloud.

    Run the source stackrc command to import environment variables.

  3. Verify the installation.

    Run the openstack catalog show nova command. If the following information is displayed, the installation is successful.

    NOTE:

    If the undercloud.conf file is modified, you need to run openstack undercloud upgrade to update the Undercloud.

Download
Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2461

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next