No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Discovering Links

Discovering Links

Configuration for the Agile Controller-DCN V300R002 (Network Overlay Scenario)

  1. Discover links between devices.

    For all service traffic that passes through the firewall, you need to create links between devices. If the Agile Controller-DCN has automatically discovered links, skip this step. If no link is found or the links are incorrect, delete the links and manually create them.

    When manually creating links, do not select the GigabitEthernet0/0/0 interface of the firewall, which is the management network interface. Do not select the Meth0/0/0 interface of the NMS.

    1. Choose Network > Link Management > Inter-Device Link.

    2. Click Link Discover.
    3. Select all devices and click Find.

    4. When the progress reaches 100%, check the link information. Click Finish.

    5. Check whether all links are discovered.

  2. Add links between the firewall and gateway switch.

    1. The link between the firewall and gateway switch is bidirectional. You need to manually add another link between the firewall and gateway switch. Click Create.

    2. Set the parameters based on the link plan and click Confirm.

  3. Configure host access links.

    1. Choose Network > Link Management > Host Access Link and click Create.

    2. Set Device name to the switch name, Port to the ports for connecting to the three file servers respectively, and Server to the host names of the five servers respectively. You can log in to a node server and run the hostname command to view the host name of the current node. Leave the MAC parameter empty. Then, click Confirm.

    3. View link information.

    4. Add other host links in the same way.

Configuration for the Agile Controller-DCN V300R003 (Hybrid Overlay Scenario)

  1. Discover links between devices.

    For all service traffic that passes through the firewall, you need to create links between devices. If the Agile Controller-DCN has automatically discovered links, skip this step. If no link is found or the links are incorrect, delete the links and manually create them.

    When manually creating links, do not select the GigabitEthernet0/0/0 interface of the firewall, which is the management network interface. Do not select the Meth0/0/0 interface of the NMS.

    1. Choose Network > Link Management > Inter-Device Link.

    2. Click Link Discover.
    3. Select all devices and click Find.

    4. When the progress reaches 100%, check the link information. Click Finish.

    5. Check whether all links are discovered.

  2. Add links between the firewall and gateway switch.

    1. The link between the firewall and gateway switch is bidirectional. You need to manually add another link between the firewall and gateway switch. Click Create.

    2. Set the parameters based on the link plan and click Confirm.

Download
Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2518

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next