No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring NVE on Switches

Configuring NVE on Switches

Enable NVE on switches and configure MAC addresses (in the 0000-5e00-01xx format). The following uses TOR2 as an example:

[~ToR2] interface Nve 1
[~ToR2] source   // The source IP address is the configured loopback address for Layer 3 interconnection.
[*ToR2] mac-address 0000-5e00-0101
[*ToR2] commit

After the configuration is complete, check whether the IP addresses in NVE configurations of all devices support Layer 3 interconnection.

Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2495

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next