No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Guide for Interworking Between HUAWEI CloudFabric Solution and Redhat OpenStack

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Resource Pools

Configuring Resource Pools

Interconnection Resource

  1. Choose Network > Resource Pool Configuration > Interconnection Resource and click Add.

  2. On the VLAN tab page, click Add to add a VLAN. Click OK.

  3. Click the IP Address tab and click Add to add an IP address. Click OK.

Global Resource

  1. Choose Network > Resource Pool Configuration > Global Resource.

  2. On the BD tab page, edit the bridge domain.

  3. Click the VLAN tab and click Add to add a VLAN.

  4. Click the VNI tab and click Add to add the default or reserved VNI resource segment.

  5. Click the EPG tab and set the lower limit of the EPG. The value ranges from 32768 to 49151.

  6. Click the Public IP Address tab and click Add to add the public IP address.

  7. Click the Interconnection IP Address tab and click Add to add the interconnection IP address segment.

  8. Retain default settings for other parameters.

Download
Updated: 2019-03-25

Document ID: EDOC1100072313

Views: 2510

Downloads: 17

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next