No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Environmental Requirements

Checking Environmental Requirements

This section describes environmental conditions such as the equipment room, cabling status, and network status to be checked before you install the eLog.

Before you install the eLog, check environmental conditions according to the following table.

Table 4-1 Requirements on installation environment

Item

Requirement

Temperature

Long-term operating condition: 15ºC to 30ºC;

Short-term operating condition: 0ºC to 45ºC

Humidity

Long-term operating condition: 40% to 65%;

Short-term operating condition: 20% to 90%

Dust

Dust granules whose diameters are larger than 5 micrometer cannot be more than 3 x 104/m3.

Floor

The floor is ESD movable and properly grounded.

Space

According to the instructions, the equipment room must have good ventilation and sufficient space for operation and maintenance.

Power supply

The power supply should be an independent external power supply system that offers stable electricity. You are advised to use the Uninterruptible Power Supply (UPS).

Network

The routers connecting all devices have been configured. The devices are accessible and the network where the devices reside is normal.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 9595

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next