No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting the Analyzer and Collector

Restarting the Analyzer and Collector

This section describes how to restart the analyzer and collector?


  1. Use the omm account to log in to the operating system.
  2. Right-click the desktop to open the terminal.
  3. Run the cd /opt/huawei/LogCenter/engineering/tools to open the directory that houses the shutdown file.
  4. Run the ./ command to close the analyzer or collector.

    If the following output is displayed, the analyzer or collector is closed.

    System is shut down successfully.

  5. Run the cd /opt/huawei/LogCenter/Runtime/bin to open the directory that houses the startup file.
  6. Run the ./ command to start the analyzer or collector.

    The analyzer or collector starts properly if the following information is displayed.
    System started completely

Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 11526

Downloads: 16

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next