No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Uninstalling the Analyzer Software Completely

Uninstalling the Analyzer Software Completely

This section describes how to completely uninstall the eLog analyzer software.

Prerequisites

If you performed security hardening, the root remote connection is disabled when the firewall starts. To uninstall the eLog, you can only use the root account to log in to the server through the iBMC interface or enable the root remote connection and close the firewall. For details, see How to Enable or Disable Root Remote Connection and Adding Exceptions on the Firewall.

Procedure

  1. Use the root account to log in to the operating system.
  2. (Optional) If the operating system had been hardened, the desktop environment won't start when the operating system startup. Run the init 5 command to start the desktop environment immediately.
  3. Right-click the desktop to open the terminal.
  4. Run the cd Directory that houses the uninstallation file command to access the directory that houses uninstallation file uninstall.sh. The default path is "opt/huawei/LogCenter/engineering/tools".
  5. Run the uninstallation script ./uninstall.sh. The uninstallation is successfully completed until the "complete" appears.
  6. If you do not want to retain historical data, run rm -rf file command to manually delete the installation directory, such as /opt/huawei/LogCenter.

Follow-Up Procedure

If the uninstallation fails or is interrupted because of an anomaly, perform subsequent operations by referring to Handling Anomalies During Uninstallation.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 7911

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next