No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the MySQL Database Configuration on the eLog

Modifying the MySQL Database Configuration on the eLog

If the configuration, such as the IP address, TCP port, user name, and password, of the MySQL database on the eLog analyzer changes, you must modify the configuration on the eLog analyzer. Otherwise, the eLog may fail to run properly.

Procedure

  1. Log in to the server where the analyzer resides as the root user.
  2. Right-click the desktop and choose Open in Terminal from the shortcut menu to access the CLI.
  3. Run the cd software-installation-path/engineering/tools command to access the directory where the analyzer startup file resides.

    The default directory is /opt/huawei/LogCenter/engineering/tools.

  4. Run the ./config_network.sh command, press 5 as instructed, and select the database configuration to be modified. After the modification is complete, the database automatically restarts.

    LogServer:/opt/huawei/LogCenter/engineering/tools # ./config_network.sh
    Which operation do you want to execute?
    1) Change the IP address.  5) Modify the database.
    2) Delete the IP address.  6) Change the web port.
    3) Set the gateway.	   7) Exit
    4) Configure DNS.
    #? 5
    Which operation do you want to execute?
    1) Change the database user password.    3) Exit.
    2) Change the port.  
    #? 1
    Info: Start to change the database user password.
    Info: Input user name: commonuser            //for example,commonuser
    Info: Enter the old password:
    Info: Successed in logging mysql database.
    Info: Enter the new password:
    Enter the new password again:
    Info: Modification succeeded,and the services will be restarted.
    Info: Change mysql success

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 7523

Downloads: 14

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next