No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the eLog System

Logging In to the eLog System

This section describes how to log in to the eLog system.

Background

Upon the first login, use the default user name admin and the default super administrator account Changeme123.

The eLog does not allow the login to the analyzer from an IPv6 addresses. Therefore, do not set server IP address to localhost if the operating system has installed IPv6.

Procedure

  1. Enter https://analyzer web access IP address:port (The eLog uses port 32229 by default. If you have specified a port other than the default one during the installation, enter the specified port.) in the address bar and press Enter.

    • It is recommended that you add the eLog site to the trusted site.
    • If you open the eLog through http://analyzer web access IP address:port (the eLog uses port 8080 by default. If you have specified port 80 other than the default one during the installation, the port number can be omitted), the system automatically changes it withhttps://analyzer web access IP address:port.

    Please use the IP address of eLog analyzer, but not the IP address of log collector.

    NOTE:

    If "Internet Explorer cannot display the webpage" is displayed, click the Tools button, and then click Internet Options. Click the Advanced tab and select Use TLS1.1 and Use TLS1.2. Restart the browser. Then, you can access the web page.

  2. Select a language on the login page and enter the correct user name and password.

    The eLog supports Chinese and English. The default user name is admin and its password is Changeme123.

  3. Click Log In.
  4. Click Browse in the Read License dialog box.
  5. Select the obtained license file in the Choose file dialog box. Then click Open.

    For details on how to obtain a license file, see Licence User Guide.

  6. The system prompts that Initial login. Please change your password. in the dialog box. Enter a new password and confirm it. Then click OK.

    Requirements on the password of user are as follows:

    • The password cannot be empty.
    • The password contains at least eight characters.
    • The password cannot be any account of the operating system, user name of the database, or their reverse.
    • The password cannot be the same as the password of the operating system user or the database user.
    • The password contains at least two of the following four types of characters: letters in upper case, letters in lowercase, digits, and special characters (~!@#$%^&*()-_=+\|[{}];:'",<.>/? or spaces).
    • You are advised to change the password per three months to ensure its security.

  7. Click OK in the Succeeded dialog box.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 7837

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next