No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Flow of the Disk Array

Configuration Flow of the Disk Array

This section describes the installation and configuration flow of the disk array.

Figure 4-8 Installation and configuration flow of the disk array

You are advised to install the server operating system and then configure the disk array. This is because partitioning will be affected if the installation sequence is wrong and the installation of multi-path software requires an operating system. For the operating system installation procedure, see Installing the SUSE Linux Operating System.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 11435

Downloads: 16

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next