No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing eLog in VM Installation Scenario

Installing eLog in VM Installation Scenario

To install the eLog on a VM, you need to prepare for the installation, install the operating system and VM, partition disks, and perform security hardening. This product provides only the installation of the software.

Installation Preparation

Before installation, ensure that the VM environment meets the hardware and software configuration requirements described in Hardware and Software Configuration Requirements (Centralized), Hardware and Software Configuration Requirements (Distributed Analyzer), and Hardware and Software Configuration Requirements (Distributed Collector). Otherwise, the installation may fail.

Installation Procedure

The eLog software installation is the same as that in the new installation scenario. For details, see Installing the Analyzer Visualization Platform and Installing a Log Collector.

Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 9122

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next