No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eLog V200R007C10 Installation Guide

Describes the installation process of product software. Includes plans, environmental requirements, and procedures for installation, as well as commissioning procedures.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Exceptions on the Firewall

Adding Exceptions on the Firewall

If you cannot log in to the server through the graphical client tool, such as VNC, it may because the firewall function is enabled and no exception is added on the firewall.

Procedure

  1. Log in to the server through the iBMC port as the root user. Right-click the desktop and choose Open in Terminal from the shortcut menu to access the CLI.

    To use the PuTTY to remotely log in to the server, you must enable root remote access. For details, see How to Enable or Disable Root Remote Connection.

  2. Run the rcSuSEfirewall2 status command to check the firewall status.

    unused indicates that the firewall is disabled, and running indicates that the firewall is enabled.
    LogServer:~ # rcSuSEfirewall2 status
    Checking the status of SuSEfirewall2                                                running

  3. Run the rcSuSEfirewall2 stop command to disable the firewall temporarily.

    NOTE:

    This command only disables the firewall but does not change its self-running status. Therefore, you need to further change its self-running status.

    LogServer:~ # rcSuSEfirewall2 stop
    Shutting down the Firewall                                                          done

    After you disable the firewall, you can run the check command to verify whether the firewall is disabled.

  4. Add exceptions on the firewall, and then restart the firewall.

    1. Choose Computer > YaST.
    2. Select Firewall under Security and Users.
    3. Click the Allowed Services tab and add exceptions, such as VNC, VNC Server.

    Select Enable Firewall Automatic Starting on the Start-Up tab and click Save Settings and Restart Firewall Now.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1100073937

Views: 9581

Downloads: 16

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next