No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cluster - Viewing Cluster Attributes

Cluster - Viewing Cluster Attributes

Scenarios

FusionInsight Manager allows you to view basic attributes after the cluster is installed.

Procedure

  1. Log in to FusionInsight Manager.
  2. Choose Cluster > Cluster Properties.

    You can view the cluster name, cluster description, authentication mode, and cluster creation time by default.

  3. Change the cluster name.

    1. Click and enter a new name.

      The following naming rules are as follows: Enter 2 to 199 characters, including letters, digits, underscores (_), hyphens (-), and spaces. Spaces can be placed only between characters.

    2. Click OK for the new cluster name to take effect.

  4. Modify the cluster description.

    1. Click and enter a new description.

      Contains a maximum of 199 characters, including letters, digits, commas (,), periods(.), underscores(_), spaces, or newline characters.

    2. Click OK for the new description to take effect.

Download
Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 5877

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next