No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Log in to FusionInsight Manager, choose Cluster > Service > KrbServer > Instance. The displayed instance management page contains the function area and role instance list.

Functional Area

The function area allows you to perform maintenance operations on roles, such as adding roles and starting or stopping instances. You can filter instances based on the role they belong to or their running status in this area, as shown Figure 3-3.


Click Advanced Search to search for specific instances by specifying filter criteria, such as Host Name, Management IP Address, Business IP Address, or Instance Groups.

Figure 3-3 Functional area

Role Instance List

The role instance list contains the instances of all roles in the cluster. The list displays the running status, configuration status, hosts, and related IP addresses of each instance.

Table 3-5 Instance running status




Indicates that the instance is running properly.


Indicates that the instance cannot run properly.


Indicates that the instance is in the isolated state.


Indicates that the instance is out of service.

Not started

Indicates that the instance is stopped.


Indicates that the initial status of the instance cannot be detected.


Indicates that the instance is being started.


Indicates that the instance is being stopped.


Indicates that an exception may occur in the instance and the instance is being automatically rectified.


Indicates that the instance is being decommissioned.


Indicates that the instance is being recommissioned.

Failed to start

Indicates that the service fails to be started.

Failed to stop

Indicates that the service fails to be stopped.

You can click an instance name to go to the instance details page and view basic information about the instance and the monitoring indicator report of the instance.

Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 5895

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next