No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Alarms and Events

Overview of Alarms and Events

Alarms

Log in to FusionInsight Manager and choose O&M > Alarm > Alarm. Figure 7-1 is displayed. You can view all alarm information in the cluster, including the name, ID, alarm severity, generation time, object, location, and operation. By default, the latest ten alarms are displayed on each page.

Figure 7-1 FusionInsight Manager alarm management

Detailed alarm parameters

Click on the left of a specified alarm to expand the alarm parameters. Table 7-1 describes the parameters.

Table 7-1 Alarm parameters

Alarm Parameter

Description

Alarm ID

Indicates the alarm ID.

Alam Name

Indicates the alarm information name.

Severity

There are four levels: critical, major, minor, and warning.

Clear Time

Indicates the time when an alarm is cleared. If the alarm is not cleared, -- is displayed.

Object

Indicates the services, processes, or modules that triggers an alarm.

Automatically Cleared

The alarm can be automatically cleared after the fault is rectified.

Alarm Status

Indicates the status of the alarm.

Generation Time

Indicates the time when the alarm is generated

Alarm Cause

Indicates the possible cause of an alarm.

Serial Number

Indicates the number of alarms generated by the system.

Additional Information

Indicates the error information.

Location Information

Indicates the detailed information for locating the alarm, which includes the following:

  • ServiceName: identifies the service for which the alarm is generated.
  • RoleName: identifies the role for which the alarm is generated.
  • HostName: identifies the host for which the alarm is generated.

Manage Alarms

  • Click Export All to export all alarm details.
  • If multiple alarms have been handled, you can select one or more alarms to be cleared and click Clear Alarm to clear the alarms in batches. A maximum of 300 alarms can be cleared in each batch.
  • Click to manually refresh the current page. Click to filter alarms displayed on the page.
  • You are allowed to filter specified alarms by object or severity.
  • Click Advanced Search. An area where you can search for alarms is displayed. You can search for alarms by alarm ID, alarm name, alarm type, start time, and end time. Click Search to display filtered alarms. After you click Advanced Search again, the number of entered search criteria is displayed.
  • You can click Clear, Masking, or Help to perform corresponding operations on an alarm.

Events

Log in to FusionInsight Manager and choose O&M > Alarm > Event. On the displayed page, as shown in Figure 7-2, you can view the information about all events in the cluster, including the alarm name, ID, severity, generation time, object, and location. By default, the latest 10 events are displayed on each page.

Figure 7-2 FusionInsight Manager event management

Event Parameters

Click on the left of a specified event. The related event parameters are displayed, as shown in Table 7-2.

Table 7-2 Event parameters

Parameter

Description

Event ID

Indicates the event ID.

Event Name

Indicates the event name.

Severity

Indicates the event severity. There are four levels: Critical, major, minor, and warning.

Generation Time

Indicates the time when an event occurs.

Object

Indicates the possible cause of an event.

Serial Number

Indicates the number of events generated in the system.

Location Information

Indicates the detailed information for locating the event, which includes the following:

  • ServiceName: identifies the service for which the event is generated.
  • RoleName: identifies the role for which the event is generated.
  • HostName: identifies the host for which the event is generated.

Additional Information

Indicates the error information.

Event Cause

Indicates the possible cause of an event.

Manage Events

  • Click Export All to export all event details.
  • Click to manually refresh the current page. Click to filter events displayed on the page.
  • You are allowed to filter specified events by object or severity.
  • Click Advanced Search. An area where you can search for events is displayed. You can search for events by event ID, event name, start time, and end time.
Download
Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 7210

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next