No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Communication Authentication for Storm Processes

Configuring Communication Authentication for Storm Processes


The authentication function is disabled by default during the communication of Storm service processes. You can decide whether to enable this function based on the specific service scenario.


Page access: On FusionInsight Manager, choose Cluster > Service > Storm > Configuration. Click All Configurations. Enter the parameter name in the search box.


Restart the corresponding service after configuration.

Table 14-9 Parameter description



Default Value


Indicates whether to enable the Netty communication authentication framework for service processes. Netty communication authentication is disabled by default, but you can enable it for a specific topology.If this parameter is configured on the client, the client configuration prevails. Otherwise, the cluster configuration prevails.


Exercise caution when you enable the Netty communication authentication framework because this will affect the topology throughput.


Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 6243

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next