No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


After you log in to FusionInsight Manager, the contents on the Homepage tab page are displayed by default, including the service status preview area, cluster maintenance and management area, and monitoring status report area.

Figure 2-1 Homepage of FusionInsight Manager

Service Status Preview Area

All services installed in the current cluster are displayed on the left of the Homepage. The icon on the left of each service name indicates that the service is running properly, the icon on the left of each service name indicates that the service is failed to start. The icon indicates that the service is not started.

On the right of the service name, you can check whether an alarm is generated for the service. If an alarm exists, the icon is used to identify the alarm severity and display the number of alarms.

If a component supports multiple services, and multiple services are installed in a cluster, the number of installed services will be displayed on the right of the service.

The icon displayed on the left of the service name indicates that the service configuration has expired.

Cluster Maintenance and Management Area

In the upper right corner of the Homepage is the cluster maintenance and management area, which provides maintenance and management for clusters.

Monitoring Status Report Area

The chart area is on the right of the Homepage, which shows the monitoring reports of the key status, such as the status of all hosts in the cluster, host CPU usage, and host memory usage. You can customize the monitoring reports displayed in the chart area.

You can zoom in a monitoring report to view the detailed information or close the report.

Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 5979

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next