No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Starting and Stopping All Instances on a Host

Starting and Stopping All Instances on a Host

Scenarios

If a host is faulty, you may need to stop all the roles on the host and perform maintenance check on the host. After the host fault is rectified, start all roles running on the host to recover host services. You can start or stop all instances on a host on the host management page or host details page on FusionInsight Manager. The following describes how to perform such operations on the host management page.

Procedure

  1. Log in to FusionInsight Manager.
  2. Click Host.
  3. Select the check box of the target host.
  4. Select Start All Instances or Stop All Instances from the More drop-down list to start or stop all role instances.

    Figure 6-3 Starting or stopping all instances on a host

Download
Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 6177

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next