No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IP Address Whitelist for Modifications Allowed by HBase

Configuring an IP Address Whitelist for Modifications Allowed by HBase

If the Replication function is enabled for HBase clusters, a protection mechanism for data modification is added on the standby HBase cluster to ensure data consistency between the active and standby clusters. Upon receiving an RPC request for data modification, the standby HBase cluster checks the permission of the user who sends the request (only HBase superusers have the modification permission). Then it checks the validity of the source IP address of the request. Only modification requests from IP addresses in the white list are accepted. The IP address white list is configured by the hbase.replication.allowedIPs item.

Page access: On FusionInsight Manager, choose Cluster > Service > component > Configuration. Click All Configurations. Enter the parameter name in the search box.

Table 14-6 Parameter description



Default Value


Allows replication request processing from configured IP addresses only. It supports comma separated regex patterns. Each pattern can be any of the following:

  • Regex Pattern

    eg: 10.18.40.* , 10.18.* ,

  • Range Pattern (Range can be specified only in the last octet)

    eg: 10.18.40.[10 to 20]

If this item is empty (default value), the white list contains only the IP address of the RegionServer of the cluster, indicating that only modification requests from the RegionSever of the standby HBase cluster are accepted.


Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 6036

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next