No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Administrator Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Syslog Northbound Parameters

Configuring Syslog Northbound Parameters

Scenarios

If users need to view alarms and events of a FusionInsight cluster on the unified alarm reporting platform, you can use the Syslog protocol on FusionInsight Manager to report related data to the alarm platform.

If the Syslog protocol is not encrypted, data may be stolen.

Procedure

  1. Log in to FusionInsight Manager.
  2. Choose System > Interconnection > Syslog.
  3. Turn on the switch on the right of Syslog Service.

    The Syslog service is disabled by default. indicates that the service is enabled.

  4. Set northbound parameters based on information provided in Table 10-3.

    Table 10-3 Syslog interconnection parameters

    Parameter Area

    Parameter

    Description

    Syslog Protocol

    Server IP Address

    Sets the IP address of the interconnection server.

    Server Port

    Specifies the port number for interconnection.

    Protocol

    Sets the protocol type. The available values are as follows:

    • TCP
    • UDP

    Severity Level

    Specifies the severity of the reported message. The options are as follows:

    • Emergency
    • Alert
    • Critical
    • Error
    • Warning
    • Notice
    • Informational (default value)
    • Debug
      NOTE:

      Severity and Facility determine the priority of the sent message.

      Priority = Facility × 8 + Severity

      For details about the values of Severity and Facility, see Table 10-4.

    Facility

    Sets the module where the log is generated. For details about the available value of this parameter, see Table 10-4. The default value local use 0 (local0) is recommended.

    Identifier

    Sets the product ID. The default value is FusionInsight Manager.

    The identifier can contain a maximum of 256 characters, including letters, digits, underscores (_), spaces, |, $, {, }, periods (.), and hyphens (-).

    Report Message

    Report Format

    Sets the message format of the alarm report. For details, see help information on the page.

    The packet can contain letters, digits, underscores (_), spaces, |, $, {, }, periods (.), and hyphens (-), and cannot exceed 1024 characters.

    NOTE:

    For details about the information field in the packet format, see Table 10-5.

    Alarm Type

    Sets the type of the alarm to be reported.

    Alarm Severities

    Sets the level of the alarm to be reported.

    Uncleared Alarm Reporting

    Periodic Uncleared Alarm Reporting

    Sets whether to report uncleared alarms in a specified period. Turn on the switch indicates that the function is enabled, and turn off the switch indicates that the function is disabled. The switch is turned off by default.

    Report Interval (min)

    Sets the interval at which alarms are reported periodically. This parameter is valid only when the switch is turned on on the right of Periodic Uncleared Alarm Reporting. The default value is 15, in minutes. The value ranges from 5 to 1440 (one day).

    Heartbeat Settings

    Heartbeat Reporting

    Sets whether to periodically report Syslog heartbeat messages. Turn on the switch indicates that the function is enabled, and turn off the switch indicates that the function is disabled. The switch is turned off by default.

    Heartbeat Period (min)

    Sets the interval at which heartbeat messages are periodically reported. This parameter is valid only when the switch is turned on on the right of Heartbeat Reporting. The default value is 15, in minutes. The value ranges from 1 to 60.

    Heartbeat Packet

    Sets the heartbeat message to be reported. This parameter is enabled if the switch is turned on on the right of Heartbeat Reporting, and cannot be left blank. The value can contain a maximum of 256 characters, including digits, letters, underscores (_), vertical bars (|), colons (:), spaces, commas (,), and periods (.).

    NOTE:

    After the periodic heartbeat packet function is enabled, packets may be interrupted during automatic recovery of some cluster error tolerance (for example, active/standby OMS switchover). In this case, wait for automatic recovery.

  5. Click OK to complete the settings.

Related Information

Table 10-4 Numeric codes of Severity and Facility

Severity

Facility

Numeric Code

Emergency

kernel messages

0

Alert

user-level messages

1

Critical

mail system

2

Error

system daemons

3

Warning

security/authorization messages

4

Notice

messages generated internally by syslogd

5

Informational

line printer subsystem

6

Debug

network news subsystem

7

-

UUCP subsystem

8

-

clock daemon

9

-

security/authorization messages

10

-

FTP daemon

11

-

NTP subsystem 13 log audit

12

-

log audit

13

-

log alert

14

-

clock daemon

15

-

local use 0~7 (local0 ~ local7)

16 to 23

Table 10-5 Packet format information field

Information Field

Description

dn

Cluster name

id

Alarm ID

name

Alam name

serialNo

Alarm serial number

NOTE:

The sequence numbers of the fault alarms and the corresponding recovery alarms are the same.

category

Alarm type. The options are as follows:

  • 0: fault alarms
  • 1: cleared alarms
  • 2: event

occurTime

Time when the alarm was generated

clearTime

Time when this alarm is cleared

isAutoClear

Whether an alarm is automatically cleared. The options are as follows:

  • 1: yes
  • 0: no

locationInfo

Location where the alarm is generated

clearType

Alarm clearance type. The options are as follows:

  • -1: not cleared
  • 0: automatic cleared
  • 2: manually cleared

level

Severity. The options are as follows:

  • 1: critical alarms
  • 2: major alarms
  • 3: minor alarms
  • 4: warning alarms

cause

Alarm cause

additionalInfo

Additional information

object

Alarm object

Download
Updated: 2019-05-17

Document ID: EDOC1100074522

Views: 6162

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next