No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Product Description 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARM and x86 Hybrid Configuration

ARM and x86 Hybrid Configuration

Overview

The ARM and x86 hybrid deployment mode allows nodes on both the ARM and x86 platforms to be deployed in a cluster. The client installation package supporting both ARM and x86 is provided.

Deploy the cluster using servers of one architecture (x86 or ARM), and then inject the installation package of the other client (ARM or x86) to the cluster. This way, the cluster supports both the ARM and x86 clients. In addition, both the x86 and ARM servers are supported for capacity expansion, protecting investment.

Guidelines

For details about the x86 and ARM hybrid deployment, see Table 4-7.

Table 4-7 Hybrid deployment

Scenario

Description

Reference

Hybrid cluster installation

Nodes installed in the same batch must use servers of the same architecture, x86 or ARM.

FusionInsight HD 6.5.0 Software Installation

Client downloading

By default, there is only one type of client installation package on the server. Inject another type of installation package into the cluster and then download the client.

For example, by default, the ARM cluster server does not have the x86 client installation package. Register the x86 software package with the ARM cluster and then download the x86 client from the cluster.

FusionInsight HD 6.5.0 Software Installation

Secondary development

Configure a third-party JAR package if the package is not supported by x86 and ARM platforms in the cluster.

FusionInsight HD 6.5.0 Application Development Guide

Capacity expansion/reduction or cluster migration

Bot the x86 and ARM servers are supported for capacity expansion.

FusionInsight HD 6.5.0 Capacity Expansion Guide

Download
Updated: 2019-05-17

Document ID: EDOC1100074548

Views: 3232

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next