No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Software Installation 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Manager on Two Management Nodes

Installing Manager on Two Management Nodes

Scenario

Install the Manager service on the active and standby management nodes respectively. If a fault occurs during the installation, view the installation logs. For details about how to view the installation logs, see Viewing Installation Logs.

Impact on the System

  • After Manager is installed, you can log in to the FusionInsight Manager system to install the cluster.
  • During the Manager installation, the OS firewall of the node where Manager is to be installed is automatically disabled by the installation script to ensure communication in the cluster. If the firewall needs to be enabled, see the FusionInsight HD 6.5.0 Communication Matrix to enable the ports manually.

Prerequisites

Procedure

Installing Active Manager

  1. Use PuTTY to log in to the active management node as user root. If you install the cluster as user omm, log in to the node as user omm.
  2. Run the following command to disable logout on timeout:

    TMOUT=0

  3. Go to the directory generated after the software package is decompressed, such as /opt/FusionInsight_Manager/software, and run the following command to check whether the HostIP.ini file generated by the configuration planning tool (such as /install_oms/192.168.10.10.ini) is uploaded to this directory. If this file is not uploaded or updated, see Generating the Configuration Files to upload the file.

    cd /opt/FusionInsight_Manager/software

    cat install_oms/192.168.10.10.ini

    //192.168.10.10.ini (Example: active MN)
    [HA]
    ha_mode=double
    local_ip1=192.168.10.10
    local_ip2=
    local_ip3=
    local_ip4=
    peer_ip1=192.168.10.11
    peer_ip2=
    peer_ip3=
    peer_ip4=
    ws_float_ip=10.10.100.201
    ws_float_ip_interface=bond0:WS
    ws_float_ip_netmask=255.255.0.0
    ws_gateway=10.10.100.254
    om_float_ip=192.168.10.200
    om_float_ip_interface=bond1:OM
    om_float_ip_netmask=255.255.255.0
    om_gateway=192.168.10.254
    ntp_server_ip=10.3.178.8,10.3.178.4
    om_mediator_ip=192.168.10.254
    sso_ip=10.3.179.3
    sso_port=7444
    bigdata_home=/opt/huawei/Bigdata
    bigdata_data_home=/srv/BigData
    cluster_nodes_scale=11
    tls_protocol_min=tlsv1.1
    [/HA]

  4. Run the following command to install the Manager and wait for the installation to complete:

    ./install.sh -f /opt/FusionInsight_Manager/software/install_oms/192.168.10.10.ini

    =================================== Welcome ===================================
    === STEP 1 Checking the parameters.
    === STEP 2 Preparing for installation components.                         [done]
    === STEP 3 Installing the manager.                                        [done]
    === STEP 4 Installing the packs.                                          [done]
    === STEP 5 Starting the OMS.                                              [done]
    === STEP 6 Waiting for ntp to startup.                                    [done]
    ============================= Install Successfully ============================
    Please visit http://10.10.100.201:8080/web/ to continue cluster installation.
    Installation is successful. 

    During the execution of the installation command, you cannot press Ctrl+Z to suspend the installation task. The installation may fail if the installation task is suspended and resumed.

    If errors occur when you install the Manager, see the following common problems in Installing FusionInsight Manager for troubleshooting.

Installing Standby Manager

  1. Use PuTTY to log in to the standby management node as user root. If you install the cluster as user omm, log in to the node as user omm.
  2. Run the following command to disable logout on timeout:

    TMOUT=0

  3. Go to the directory generated after the software package is decompressed, such as /opt/FusionInsight_Manager/software, and run the following command to check whether the HostIP.ini file generated by the configuration planning tool (such as /install_oms/192.168.10.11.ini) is uploaded to this directory. If this file is not uploaded or updated, see Generating the Configuration Files to upload the file.

    cd /opt/FusionInsight_Manager/software

    cat install_oms/192.168.10.11.ini

    //192.168.10.11.ini (Example: standby MN)
    [HA]
    ha_mode=double
    local_ip1=192.168.10.11
    local_ip2=
    local_ip3=
    local_ip4=
    peer_ip1=192.168.10.10
    peer_ip2=
    peer_ip3=
    peer_ip4=
    ws_float_ip=10.10.100.201
    ws_float_ip_interface=bond0:WS
    ws_float_ip_netmask=255.255.0.0
    ws_gateway=10.10.100.254
    om_float_ip=192.168.10.200
    om_float_ip_interface=bond1:OM
    om_float_ip_netmask=255.255.255.0
    om_gateway=192.168.10.254
    ntp_server_ip=10.3.178.8,10.3.178.4
    om_mediator_ip=192.168.10.254
    sso_ip=10.3.179.3
    sso_port=7444
    bigdata_home=/opt/huawei/Bigdata
    bigdata_data_home=/srv/BigData
    cluster_nodes_scale=11
    tls_protocol_min=tlsv1.1
    [/HA]

  4. Run the following command to install the Manager and wait for the installation to complete:

    ./install.sh -f /opt/FusionInsight_Manager/software/install_oms/192.168.10.11.ini

    Press y twice continuously and press Enter.

    =================================== Welcome ===================================
    === STEP 1 Checking the parameters.
    The ws_float_ip(10.10.100.201) already exists on the network. Is it used on the active OMS HA? (y/n):y 
    The om_float_ip(192.168.10.200) already exists on the network. Is it used on the active OMS HA? (y/n):y 
    === STEP 2 Preparing for installation components.                         [done]
    === STEP 3 Installing the manager.                                        [done]
    === STEP 4 Installing the packs.                                          [done]
    === STEP 5 Starting the OMS.                                              [done]
    === STEP 6 Waiting for ntp to startup.                                    [done]
    ============================= Install Successfully ============================
    Please visit http://10.10.100.201:8080/web/ to continue cluster installation.
    Installation is successful.   

    During the execution of the installation command, you cannot press Ctrl+Z to suspend the installation task. The installation may fail if the installation task is suspended and resumed.

    If errors occur when you install the Manager, see the following common problems in Installing FusionInsight Manager for troubleshooting.

Download
Updated: 2019-05-17

Document ID: EDOC1100074555

Views: 6658

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next