No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Software Installation 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Registering Software Packages for Cross-Platform (x86 and ARM) Clusters

Registering Software Packages for Cross-Platform (x86 and ARM) Clusters

Scenario

This section describes how to register software packages in the following scenarios of cross-platform (x86 and ARM) clusters:

  • When nodes of a different type (for example, ARM) need to be added to the x86-based cluster to expand the capacity, software packages of the ARM nodes need to be registered in the x86-based cluster. After that, you can perform the capacity expansion.
  • When the client needs to be installed on the node of a different type (for example, ARM), but the cluster server is of x86 type, software packages of the ARM node need to be registered to in the x86-based cluster. Then, you can download the client installation package from the x86 server.

Prerequisites

  • The cluster has been installed, and the passwords of the omm user for the primary and standby management nodes have been obtained.
  • You have obtained software installation packages from the x86 or ARM nodes by referring to Software Installation > Preparations for Installation > Preparing Tools and Software. The obtained component installation packages are the same as those on the existing cluster server. This section uses the Manager, HD, and Porter component packages as examples.
NOTE:
  • The registered packages for a node of the new type must be the same as those installed in the existing cluster. Only in this way can the client installation package be downloaded.
  • You can view the installed component packages by choosing System > Component. BASE indicates the FusionInsight Manager component package.

Procedure

NOTE:

The following scenarios are examples. Replace the registered software package as required.

  • Capacity expansion scenario: If ARM nodes need to be added to an x86-based cluster to expand the capacity, register the software packages of the ARM node in the x86-based cluster.
  • Heterogeneous client scenario: If the cluster server is of x86 type, but the client needs to be installed on the ARM node, register the software packages of the ARM node in the x86-based cluster.
  1. Use WinSCP to log in to the primary management node as the omm user and upload installation packages (such as FusionInsight_Manager_6.5.0_RHEL_ARM64.tar.gz, FusionInsight_HD_6.5.0_RHEL_ARM64.tar.gz and FusionInsight_Porter_6.5.0_RHEL_ARM64.tar.gz) of the ARM node to the /opt directory.
  2. Use PuTTY to log in to the primary management node as the omm user, run the following commands to go to the registration script directory, and register software packages of the ARM node:

    cd ${BIGDATA_HOME}/om-server/om/sbin/pack/

    ./register_pack.sh /opt/FusionInsight_Manager_6.5.0_RHEL_ARM64.tar.gz /opt/FusionInsight_HD_6.5.0_RHEL_ARM64.tar.gz /opt/FusionInsight_Porter_6.5.0_RHEL_ARM64.tar.gz

    =================================== Welcome =================================== 
    === STEP 1 Checking the parameters. 
    === STEP 2 Preparing the packs.                                           [done] 
    === STEP 3 Installing the packs.                                          [done] 
    === STEP 4 Restarting the OMS server.                                     [done] 
    ============================= Install Successfully ============================

Download
Updated: 2019-05-17

Document ID: EDOC1100074555

Views: 5537

Downloads: 6

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next