No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionInsight HD 6.5.0 Software Installation 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

FusionInsight HD supports two installation methods: using Configuration Planning Tool to generate configuration files for automatic installation, or manually edit the configuration files for installation.

  • Installation using the Configuration Planning Tool: Fill in the planning data in the Configuration Planning Tool, generates the configuration files and automatic installation template, and import the template to the FusionInsight HD portal to perform automatic installation.
  • Perform manual installation: Compile the configuration files and perform installation according to the wizard on the FusionInsight HD portal.

In this document, the installation mode of using the Configuration Planning Tool to generate an installation template and perform automatic installation is described as the major mode of the FusionInsight HD installation. It is recommended that you install FusionInsight HD in this mode. Operations in the preinstallation preparation, installation verification, and initial configuration of the two installation modes are the same. If you manually edit the configuration files, see Installation Process (Perform Manual Installation) to perform the installation in installation process phase.


The FusionInsight HD software package consists of multiple pack packages. You are advised to install all required packages at a time. This section describes how to install the Manager, HD, Porter, Spark2x, Elasticsearch, Flink, GraphBase and Elk packs at a time, the operation steps of other packs are similar. Users also can install the unused component packages on the existing cluster. For details, see Installing Packs in the Current Cluster.

Figure 1-3 Installation process
Updated: 2019-05-17

Document ID: EDOC1100074555

Views: 6136

Downloads: 6

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next