No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionInsight HD 6.5.0 Software Installation 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing a Health Check

Performing a Health Check

Scenario

Perform a health check for the FusionInsight HD cluster to ensure that cluster parameters, configuration, and monitoring are correct and the cluster can run stably for a long time.

NOTE:
  • The system health checks include service level and host-level health checks:
    • Service-level health checks focus on whether components can provide services properly.
    • Host-level health checks focus on whether host indicators are normal.
  • The system health check has three types of check items: Health Status, related alarms, and customized monitoring indicators of each check object. The health check results are not always equal to the Health Status on the page.
  • For description of health check indicators, see FusionInsight HD 6.5.0 Health Check Guide.

Prerequisites

  • You have obtained the address of FusionInsight Manager.
  • You have obtained the account and password for logging in to FusionInsight Manager.
  • You have Logged in to the FusionInsight Manager.

Procedure

  • Manually perform the health check of cluster.
    1. Click Homepage.
    2. Choose More > Health Check to start the health check for cluster.
      Figure 4-3 Perform the health check of cluster
      NOTE:

      To export the health check result, click Export Reports in the upper left corner.

  • Manually perform the health check of a host.
    1. Click Host.
    2. Select the check box on the left of the target host.
    3. Choose More > Health Check to start the health check for the host.
      Figure 4-4 Perform the health check of a host
      NOTE:

      To export the health check result, click Export Reports in the upper left corner.

Download
Updated: 2019-05-17

Document ID: EDOC1100074555

Views: 6838

Downloads: 7

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next