No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping an OPS Task

Stopping an OPS Task

Context

The OPS allows you to run the scripts you make. You can stop a script that is running or wait to run.

When you stop a script, subsequent operations specified in the script will not be performed. Exercise caution when you perform this operation.

Procedure

  1. (Optional) Run the display ops process current command to check running OPS tasks and obtain the ID of the task that you want to stop.
  2. Run the ops stop process process-id command to stop an OPS task.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 15024

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next