No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Number of Tokens for the Channel from the FEI to LDM

Configuring the Number of Tokens for the Channel from the FEI to LDM

Context

The switch needs to process protocol packets through the channel from the FEI to LDM, and the number of available tokens determines the capability of the channel to process protocol packets. If you need to improve the channel capability, increase the number of tokens. However, this method will increase the CPU usage. If the CPU usage is high or the network is unstable, reduce the number of tokens.

NOTE:

The number of tokens for the channel from the FEI to LDM can only be configured on the 12800E that has the FD-X series cards installed.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run assign token fei to ldm token-number

    The number of tokens is set for the channel from the FEI to LDM.

    By default, the number of tokens for the channel from the FEI to LDM is 500.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 10757

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next