No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Attributes for a Clock Source

(Optional) Configuring Attributes for a Clock Source

Context

Proper settings of clock source attributes can improve the clock synchronization network quality and maintain stable clock signals on the network.

Pre-configuration Tasks

Before configuring the clock source selection mode, complete the following task:

Configure a clock source. For details, see Configuring a Clock Source.

Configuration Procedure

The following tasks are optional and can be performed in any sequence as required. Default values are recommended if no special requirements need to be met.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 12673

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next