No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Synchronous Ethernet

Application Scenarios for Synchronous Ethernet

In Figure 5-14, devices are connected, and clock synchronization needs to be achieved between upstream and downstream devices.

Figure 5-14 Clock synchronization networking

To ensure reliability of the clock synchronization network, Device1 and Device3 each are connected to an external clock source to import clock signals. During network deployment, each device preferentially traces clock signals transmitted from Device1. When the clock source connected to Device1 is faulty, devices trace clock signals transmitted from Device3.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 11167

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next