No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting a Card

Resetting a Card

Context

When a card cannot work properly, you can reset the card, including the MPU, LPU, SFU, and CMU.

Resetting a card will interrupt services. When a card is not working properly, try to rectify the fault before resetting the card, preventing services from being affected.

Procedure

  1. (Optional) Run display device

    The card status is displayed.

  2. Run reset slot slot-id

    The card is reset.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 14688

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next