No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for 1588v2

Default Settings for 1588v2

Table 6-2 Default settings for 1588v2

Parameter

Default Setting

Global 1588v2 function

Disabled

Interface 1588v2 function

Disabled

1588v2 domain

Domain 0

Method to process Announce messages on an interface

Announce messages are not ignored.

Mode in which 1588v2 messages carry timestamps

One-step mode

Interval for sending Announce messages

128/1024s

Number of Announce message receiving timeouts

3

Minimum interval for sending Delay-Req and Pdelay-Req messages

128/1024s

Encapsulation mode of 1588v2 messages

Multicast MAC encapsulation

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 15584

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next