No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for the Information Center

Default Settings for the Information Center

Table 3-5 Default settings for the information center

Parameter

Default Setting

Information center

Enabled

Maximum number of logs in the log buffer

512

Maximum number of traps in the trap buffer

256

Log file size

8 MB

Maximum number of log files that can be saved

200

Log host IP address

None

Timestamp format

date

Default Output Rules for Information Channels

Default output rules define information modules to which different types of information can be output, lowest information severity, and information channels, which are shown in Table 3-6.

Table 3-6 Default output rules
Output Channel Module Enabled to Output Information Status Lowest Output Severity
0 (console) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Enabled
  • Log: warning
  • Trap: debugging
  • Debugging: debugging
1 (remote terminal) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Enabled
  • Log: warning
  • Trap: debugging
  • Debugging: debugging
2 (log host) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: informational
  • Trap: debugging
  • Debugging: debugging
3 (trap buffer) default (all modules)
  • Log: Disabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: informational
  • Trap: debugging
  • Debugging: debugging
4 (log buffer) default (all modules)
  • Log: Enabled
  • Trap: Disabled
  • Debugging: Disabled
  • Log: warning
  • Trap: debugging
  • Debugging: debugging
5 (SNMP agent) default (all modules)
  • Log: Disabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: debugging
  • Trap: debugging
  • Debugging: debugging
6 (channel 6) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: debugging
  • Trap: debugging
  • Debugging: debugging
7 (channel 7) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: warning
  • Trap: debugging
  • Debugging: debugging
8 (channel 8) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: debugging
  • Trap: debugging
  • Debugging: debugging
9 (channel 9) default (all modules)
  • Log: Enabled
  • Trap: Enabled
  • Debugging: Disabled
  • Log: debugging
  • Trap: debugging
  • Debugging: debugging
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 14283

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next