No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Pre-configuring Devices

Pre-configuring Devices

Context

You can pre-configure offline physical devices and deploy services on these devices in a unified manner. For example, you can create an offline modular device and then create an offline board on the device to deploy services.

After deploying services, you can install hardware components as planned. If a correct hardware component is installed in the correct position, services are activated successfully. If an incorrect hardware component is installed, the system processes the hardware component based on the configured conflicting policy.
  • If the installed hardware component takes precedence in the conflicting policy, the system deletes the pre-configuration and the configuration on the installed hardware component takes effect.
  • If the pre-configuration takes precedence in the conflicting policy, the system retains the pre-configuration and the installed hardware component cannot be registered or work properly. In this case, you must replace a correct hardware component or modify the pre-configuration.
To configure conflicting policies, run the device conflict-policy keep-config command.

Procedure

  • Configure an offline modular device.
    1. Run system-view

      The system view is displayed.

    2. Run device chassis chassis-id chassis-type chassis-type

      An offline modular device is created.

    3. Run commit

      The configuration is committed.

      NOTE:
      • This command takes effect only when stack is enabled.

      • After physical modular devices go online, the system creates corresponding offline modular devices. Therefore, if physical modular devices are online, you can deploy services without having to create offline modular devices.

      • The type of offline modular devices to be created must be supported by physical devices.

      • Currently, offline modular devices cannot be replaced. To replace an offline modular device, you must delete the device and then run the device chassis command to create a new offline modular device.

  • Configure an offline board.
    1. Run system-view

      The system view is displayed.

    2. Run device board slot-id board-type board-type

      An offline board is created.

    3. Run commit

      The configuration is committed.

      NOTE:
      • After physical boards go online, the system creates corresponding offline boards. Therefore, if physical boards are online, you can deploy services without having to create offline boards.

      • The type of offline boards to be created must be supported by physical devices.

      • Only one offline board can be configured in a slot, and offline boards cannot be replaced. To replace an offline board, you must delete the board and then run the device board command to create a new offline board.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 12684

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next