No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of Maintenance Assistants

Overview of Maintenance Assistants

The maintenance assistant function implements automatic device management and maintenance. You can create an assistant and define the trigger condition and task of the assistant. If the assistant task is ready to run, the system monitors the device running status in real time. When the configured trigger condition is met, the system automatically performs the configured task. Assistants enable the system to monitor its running status and take actions in different conditions, improving system maintainability.

Maintenance assistants are classified into the following types:
  • Command assistant: The trigger conditions and tasks of a command assistant are configured using commands.

  • Script assistant: The trigger conditions and tasks of a script assistant are defined using Python scripts.

The device supports the following trigger conditions and tasks for command assistants:
  • Trigger conditions

    • Timer

    • Software and hardware alarms

    • Software and hardware events

    • Trap OID

    • Log

  • Tasks

    • Run commands

    • Execute batch files

    • Execute Python scripts

The device supports the following trigger conditions and tasks for script assistants:
  • Trigger conditions

    • Timer event

    • Command line event

    • Route change event

  • Tasks

    • Execute Python scripts

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 11076

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next