No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Stopping an Assistant

Stopping an Assistant

Context

If an assistant is no longer needed, you can stop it.

Stopping a running assistant interrupts the task of the assistant. Exercise caution when you perform this operation.

NOTE:
This configuration process is supported only on the Admin-VS.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the ops command to enter the OPS view.
  3. Stopping an assistant.

    • Stopping a command assistant.

      1. Run the assistant task-name command to enter the assistant view.

      2. Run the shutdown command to stop an assistant.

        To start the command assistant, run the undo shutdown command.

    • Stopping a script assistant.

      1. Run the shutdown script-assistant file-name command to stop a script assistant.

        To start the script assistant, run the undo shutdown script-assistant file-name command.

  4. Run the commit command to commit the configuration.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 12623

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next