No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for the Information Center

Application Scenarios for the Information Center

Outputting Logs to a Log File

In the network shown in Figure 3-3, the information center is configured on the switch, which is connected to an FTP server. The information center stores the logs of the specified severity in a log file, which needs to be transferred to the FTP server. The logs help an administrator learn the switch's running status or troubleshoot the switch.

Figure 3-3 Outputting logs to a log file

Outputting Logs to a Log Host

In the network shown in Figure 3-4, the information center is configured on the switch, which is connected to multiple log hosts. The information center sends logs of different severities to different log hosts, helping an administrator learn the device running status.

Figure 3-4 Outputting logs to a log host

Outputting Traps to the NMS

In the network shown in Figure 3-5, the information center is configured on the switch, which is connected to a network management system (NMS). The information center sends traps to the NMS, which monitors the device running status based on the traps.

Figure 3-5 Outputting traps to the NMS

Outputting Debugging Messages to the Console

In the network shown in Figure 3-6, the information center is configured on the switch. The information center sends debugging messages to the console, helping the maintenance personnel debugs the switch.

Figure 3-6 Outputting debugging messages to the console

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 12591

Downloads: 12

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next