No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Load Balancing Function for Links Between LPUs and SFUs

Configuring the Load Balancing Function for Links Between LPUs and SFUs

Context

By default, the load balancing function is disabled for links between LPUs and SFUs, and all the links between LPUs and SFUs participate in traffic forwarding. As a result, traffic may not be evenly distributed using the hash algorithm and is lost when being forwarded. After the load balancing function is enabled, the system selects the optimal traffic forwarding path according to the links between SFUs and LPUs.

NOTE:
The CE12800E does not support this function after having the FD-X series cards installed.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run assign forward fabric load-balance

    The load balancing function is enabled for links between LPUs and SFUs.

  3. Run commit

    The configuration is committed.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 10917

Downloads: 10

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next