No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Device Management

CloudEngine 12800 and 12800E V200R005C10

This document describes the configurations of Device Management, including device status query, hardware management, Information Center Configuration, NTP, Synchronous Ethernet Configuration, Fault Management Configuration, Energy-Saving Management Configuration, Performance Management Configuration, Maintenance Assistant Configuration, and OPS Configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Electronic Labels

Displaying Electronic Labels


Electronic labels identify the hardware of devices.


  • Run display device elabel [ chassis chassis-id | slot slot-id [ card card-id ] ] [ brief ]

    The electronic labels of the device are displayed.

  • Run display device elabel backplane [ chassis chassis-id ]

    The electronic labels of the backplane are displayed.

  • Run the display device elabel pdu-backplane [ slot slot-id ] command to view the electronic label of the backplane of a PDU.
Updated: 2019-04-20

Document ID: EDOC1100074722

Views: 14260

Downloads: 18

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next