Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the PIM Status of the Specified Downstream Interfaces in IPv4 PIM Entries
Context
You can clear the PIM status on the specified downstream interface in a PIM entry. IGMP status and static groups on this interface are not affected.
Clearing the PIM status of downstream interfaces may trigger the sending of Join/Prune packets, which affects multicast services.
Procedure
- To clear the PIM status of specified downstream interfaces in specified PIM entries, run the reset pim [ vpn-instance vpn-instance-name ] routing-table group group-address mask { group-mask-length | group-mask } source source-address interface interface-type interface-number command in the user view.
![]()
NOTE: You can also run the reset pim [ vpn-instance vpn-instance-name ] routing-table all command in the user view to reset PIM status of downstream interfaces in all PIM routing entries.
Previous
